PinPoint-E EV-DO

Example:

AT*STATICIP=192.168.1.23

Caution: STATICIP does not set the IP address of the modem, it merely tells the modem which IP address to expect. If the expected IP address is not granted while registering on the cellular network, the modem will try to register on the network again until it receives that IP address. If your account is set up for a dynamic IP address and you set an address for *STATICIP, you may not be able to register on the network at all since there is no guarantee you will receive the same dynamic IP address again.

*STATUSCHK=n

Checks if an SMS message has been received by the modem.

n=1‐255 : Seconds between checks.

n=0 : Never check.

Serial

This group includes commands specific to general use of the serial port.

Figure 1-6: AceManager : Serial

En

Toggle AT command echo mode.

n=0 : Echo Off.

n=1 : Echo On.

 

 

 

 

 

 

 

123

 

 

 

 

 

20070914

 

 

 

Page 128
Image 128
Sierra Wireless EV-DO manual Serial, STATUSCHK=n