Sharp PG-D3050W Setting Up the Projector Network Environment “Network” Menu, Setting a Password

Models: PG-D3550W PG-D3050W PG-D2870W

1 75
Download 75 pages 24.08 Kb
Page 58
Image 58
Setting Up the Projector Network Environment (“Network” Menu)

Setting Up the Projector Network Environment (“Network” Menu)

Menu operation n Page 40

Pict. SIG SCR PRJ1 PRJ2 Network

1

 

Password

Disable

 

2

 

DHCP Client

Off

 

31 Setting a Password TCP/IP

4a Setting a Password1 Select “Password”, then press ENTER or Q.2 Press P or R to set the first digit3 Enter the remaining 3 digits, then press ENTER. Reset Network Setting

54 Enter the same password in “Reconfirm”, then press ENTER. Restart Network

 

 

 

 

 

 

 

 

 

 

IP Address

XXX . XXX . XXX . XXX

 

 

6

 

 

MAC Address

XX : XX : XX : XX : XX : XX

 

 

 

Projector

XX-XXXX

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Link

￿ Disconnected

 

 

 

 

 

 

 

 

 

 

 

 

SEL./ADJ.

ENTER

END

1 Setting a Password

If you do not want others to change the setting for the “Network” menu, set a password.

2If you forget the passworda Changing the Password Enter the password in “Old Password” using P, R, Q and O, then press ENTER.

a Setting a Password

1On the projector, pressManual background Select “Password”, then press ENTER or Q.

The screen for entering the password appears.

Network

Setting the Password

 

 

 

 

Old Password

– – – –

New Password

Reconfirm

– – – –

2Manual background Press P or R to set the first digit

Manual background in “New Password”, then press Q.

3Manual backgroundManual background Enter the remaining 3 digits, then press ENTER.

• To return to the previous digit, press O.

4Manual backgroundManual background Enter the same password in “Reconfirm”, then press ENTER.

The status for “Password” changes to Manual background “Enable”.

3Manual backgroundManual background Enter the password in “New Password” using P, R, Q and O, then press ENTER.

4Manual backgroundManual background Enter the same password again in “Reconfirm” using P, R, Q and O, then press ENTER.

Manual background Note

If you do not need the password protection for the “Network” menu settings anymore, press ENTER without entering the new password in steps 3 and 4.

To cancel the password settings, press

RETURN.

If you forget the password

If you forget the password, perform the following procedure to delete it, then set a new password.

Manual background Note

Once the password is set, you must enter the password to change the “Network” menu settings.

a Changing the Password

1Manual backgroundManual background Select “Password”, then press ENTER or Q.

The screen for entering the password Manual background appears.

On the projector, press

Manual backgroundManual backgroundManual backgroundManual backgroundManual background .

Manual background Note

If ENTER is held down for more than 5 seconds, the operation buttons on the projector will be locked. (See page 52.)

You cannot use the buttons on the remote control to delete the password.

54

Page 58
Image 58
Sharp PG-D3050W, PG-D2870W, PG-D3550W Setting Up the Projector Network Environment “Network” Menu, a Setting a Password