Sharp PG-D3550W Adjusting the Projector Function “PRJ-ADJ1/2” Menu Continued, Keylock Function

Adjusting the Projector Function (“PRJ-ADJ1/2” Menu) (Continued)

8 Keylock Function

Use this function to lock the operation buttons on the projector.

This function can be set using either the menu screen or ENTER on the projector.

a Setting with the menu screen

Selectable	Description
items
On	All buttons on the projector, except
	STANDBY/ON, are locked.
Off	Turns off the Keylock function.

a Setting with the projector buttons

Locking the Operation Buttons

1 Hold down ENTER on the projector for about 5 seconds while the projector is being turned on.

• The Keylock function screen is displayed.

PRJ - ADJ1

Use this function to lock the operation buttons on the projector.

(Except STANDBY/ON button)

Note: You can release the keylock by holding down ENTER on the projector for about 5 seconds.

Return

On

SEL. ENTER END

2 Select “On”, then press ENTER.

On-screen display

•The Keylock function does not affect the operation with the remote control buttons.

•You cannot use the Keylock function while the projector is warming up.

Menu operation n Page 40

Taking the Keylock Off

Hold down ENTER on the projector for about 5 seconds.

On-screen display

Info

•Even when Keylock function is set to “On”, STANDBY/ON on the projector can be used to turn on and off the power.

•Keylock cannot be set while the projector is: displaying the “Setup Guide” or “Menu” screens, in Standby mode, warming up, changing input signals, operating the Auto Sync or Input Search function, in Freeze mode or on the “System Lock” screen during warming up.

9 Selecting the Quick

Start Menu

Selectable items	Description
On	Pressing MENU displays the
	Quick Start Menu screen.
Off	Pressing MENU displays the
	Complete Menu screen.

0 COMPUTER2 Select

You can also use the MONITOR OUT terminal as the COMPUTER/COMPONENT 2 terminal. Select whether to use the terminal as an input terminal or output terminal.

Selectable items	Description
Input	The terminal can be used as an
	input terminal (COMPUTER/
	COMPONENT 2).
Monitor Output	The terminal can be used as an
	output terminal (MONITOR
	OUT).

Note

•Set this before connecting the external equipment.

•The setting cannot be changed when Input mode is “COMPUTER 2”.

52