Sharp PG-D3550W DHCP Client Setting, 3 TCP/IP Setting, Returning to Default Settings Network

2 DHCP Client Setting

Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work.

Selectable items	Description
On	Obtains confi guration
	parameters for TCP/IP network
	automatically.
Off	Sets the TCP/IP manually.

Select “On” for “DHCP Client”. “Obtaining IP Address...” appears, then the menu screen appears. Confirm the parameters of IP Address, Subnet Mask and Gateway on the TCP/IP screen.

If the DHCP server is not available, “Could not obtain IP Address.” appears.

In this case, set the TCP/IP manually. (See the item 3.)

3 TCP/IP Setting

Set the TCP/IP manually.

1 Select “Off” for “DHCP Client”, then press ENTER.

2 Select “TCP/IP”, then press

ENTER.

3 Enter “IP Address” using P, R, Q and O, then press ENTER.

									Network
Setting the TCP/IP
IP Address	1	9	2	.	1 6 8	. 1 5 0		. 0 0 2
Subnet Mask	2 5 5			.	2 5 5	.	2 5 5	.	0 0 0
Gateway	0 0 0			.	0 0 0	.	0 0 0	.	0 0 0

4 Enter “Subnet Mask” using P, R,

Q and O, then press ENTER.

5 Enter “Gateway” using P, R, Q and O, then press ENTER.

	Menu operation n Page 40
Selectable items	Description
IP Address	Factory default setting:
	192.168.150.002
	Enter an IP address
	appropriate for the network.
Subnet Mask	Factory default setting:
	255.255.255.000
	Set the subnet mask to the
	same as that of the computer
	and equipment on the
	network.
Gateway	Factory default setting:
	000. 000. 000. 000
	* When not in use, set to “000.
	000. 000. 000”.

Note

•Confi rm the existing network's segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other network equipment or computers. If “192.168.150.002” is not used in a network with an IP address of “192.168.150.XXX”, you don't have to change the projector IP address.

•For details about each setting, consult your network administrator.

4 Returning to Default

Settings (Network)

This function allows you to initialize the Network settings you have made in the projector.

Note

•If the values for IP Address, Subnet Mask or Gateway of the projector have been returned to the default settings, the computer cannot be connected to the projector depending on the computer’s network settings.

5 Restart Network Function

Restarts the network function.

Perform this function when the projector cannot be controlled via the network.

Features Useful

55