Appendix D. Additional functions
The following are additional functions you can use through EWS (Embedded Web Service).
Printer properties settings
You can check and modify printer and document properties for an installed printer. For properties that are not supported by the printer driver, an error message indicating that the property is not supported is displayed. These settings are used only for printing from this system to the printer. However, these settings do not affect the printer properties of the network printer.
Firmware upgrade (HTTP)
You can upgrade your printer’s firmware using the HTTP protocol. First, you need to download firmware from the Dell website (http://suport.dell.com.)
NOTE: Before upgrading the firmware, make sure that TCP/IP parameters are entered in the print server.
1Run your web browser and access Embedded Web Service.
2Click Printer Settings Maintenance Update Print Server Firmware.
3Click Browse, and then select the downloaded new firmware.
4Click Update Printer Firmware.
NOTE: It takes a few minutes to upgrading the firmware. After completely upgrade, the printer will be reset.
Default setting (HTTP/SNMP)
You can reset all of your network parameter settings to their default status.
NOTE: All default parameters will be applied after the print server restarts.
IP filtering
This security feature (IP Filtering) provides the ability to prevent unauthorized network access to the network print server based on IP addresses set by a network administrator using EWS.
1Run your web browser and access Embedded Web Service.
2Select Printer Server Settings Other Features IP Filtering Enable.
Appendix D. Additional functions
34