Appendix:
If you are using a direct computer to printer connection and are unsure as to how to change your computer’s IP address, please follow the instructions below.
This troubleshooting guide is for Windows XP operating systems only; if you are using a different operating system, please refer to your operating system’s help.
NOTE: You will need to disable any proxy server settings used in your computer (if applicable).
If you are using Windows XP Internet Explorer 6 this can be done by opening a web browser window, selecting
Tools 
Internet Options 
Connections 
LAN Settings 
Proxy Server.
Setting the IP address of your computer to match the IP address seen on the Network Settings page.
If you are using Windows XP, you may use the following method.
1Select Network Connections in the computer’s Control Panel.
2Select the LAN wired connection you are using.
3Find Internet Protocol (TCP/IP). Select it and view its Properties.
4Take note of the current settings on the Properties screen. You must restore these settings to your computer once the Dell Internal Wireless Adapter has been configured.
5Select Use the following IP address.
6For IP address, enter the first three numbers sets to match the IP address of the printer (as seen on the Configuration Page printed). You must vary the last set of numbers so that it is different from the IP address of the printer.
E.g. If the IP address assigned to the printer is 192.0.0.192, you must set your computer’s IP address within the same range (e.g. 192.0.0.191 or 192.0.0.193)
7Copy the Subnet mask and Default gateway as seen on the Configuration Page.
8You should now be able to access the printer’s Embedded Web Server.
20
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn
