Dell 5002 Making a certificate into a file using Windows Console, Select File Add/Remove Snap-in

•User Password: 802.1x EAP authentication methods, such as EAP-MD5, EAP-MSCAHPv2, EAP-TTLS, and PEAP, require an EAP user password as an account password. A user password is necessary, if 802.1x authentication is enabled. This is not saved as the default value.

•Root certificate: You can install a root certificate. To be installed on the Wireless Network Printer Card, a root certificate must be in the form of Base64 Encoded X.509 with a .cer extension and be less than 3,072 bytes. EAP-TLS, EAP-TTLS, and PEAP authentications need root certificates. a Click Configure.

b If the root certificate has been configured, detailed information on the root certificate displays.

c Select the root certificate file.

d Upload the file and click back to return to the front page.

–Enable Server certificate Validation: This option determines whether or not the client authenticates the server. If Server Certificate Validation is disabled, EAP-TTLS and PEAP authentication do not require a root certificate.

•Client certificate: You can install a client certificate. To be installed on the Wireless Network Printer Card, a client certificate must be in the form of PKCS #12 / Personal Information Exchange with a .pfx extension and be less than 3,072 bytes. EAP-TLS authentication needs a client certificate. a Click Configure.

b If the client certificate has been configured, detailed information on the client certificate displays.

c Select the client certificate file.

d Upload the file and click back to return to the front page.

Making a certificate into a file using Windows Console

1From the Windows Start menu, select Run.

2Enter mmc in the Run dialogue box.

3Select File Add/Remove Snap-in.

4Click Add, select Certificate, and then click Add.

Appendix G. Wireless network environment

53