Dell 5002 manual Ethernet speed, Click Printer Server Settings Other Features Restart Machine

3Configure an IP filter.

•IP Filtering Enable: You can enable or disable IP filtering.

•IP Address 1 ~ IP Address 10: You can enter filtered IP addresses. Users having the IP addresses set here are able to access the network print server.

•IPv6 Filtering Enable: You can enable or disable IPv6 filtering.

4Click Submit.

Only system administrators or authorized users can set, via EWS, IP addresses that can access the device. Up to 10 addresses or ranges of address choices can be made and set. Authorized users are able to change the action (Apply/ Undo) and to print to the network print server..

NOTE: Ranges of addresses shouldn't contain “null” or “0.0.0.0” values.

Restart

1Run your web browser and access Embedded Web Service.

2Click Printer Server Settings Other Features Restart Machine.

You can reboot the network print server, if your network settings are not applied correctly or the network card is disconnected from your network.

Ethernet speed

You can set the communication speed for Ethernet connections.

1Run your web browser and access Embedded Web Service.

2Click Printer Settings Print Settings Network Menu.

•Speed: Automatic, 10 Mbps(Half Duplex), 10 Mbps(Full Duplex), 100 Mbps(Half Duplex),100 Mbps(Full Duplex). select a Ethernet speed from the drop-down list.

•1000 Mbps(Full Duplex) for Dell 5330dn Mono Laser Printer only.

3Click Submit.

Appendix D. Additional functions

35