Dell 5002 manual Identifying the printers IP address

9Once you have configured the printer, you may want to print a Configuration Page to confirm your settings.

aPress Setup Machine Setup from the home screen.

bPress the Next () button.

cPress the up/down arrows to select Reports.

dPress the up/down arrows to select Network Settings.

NOTE: After completing the connection, you can check the AP’s SSID information.

aPress Setup Machine Setup from the home screen.

bPress the Next () button.

cPress the up/down arrows to select Network Setup.

dPress the up/down arrows to select Wireless.

ePress the up/down arrows to select WLAN Signal.

fConfirm the AP’s SSID name and status.

Method 3:

Dell printers contain an Embedded Web Server (EWS) that can be accessed from a compatible web browser over the internet. The EWS provides management and configuration access for the Dell printer including its network and wireless settings. The printer IP address is required to access its Embedded Web Server.

NOTE: The Dell Internal Wireless Adapter is shipped in Ad-Hoc mode by default. To configure the Dell Internal Wireless Adapter in Ad-Hoc mode, you must access the printer's Embedded Web Server using a direct connection to your computer. This is only recommended for advanced users.

Identifying the printer's IP address

1Turn on the printer.

There are two ways to access the printer from your computer. Either;

•Connect the supplied Ethernet cable to connect the printer to a LAN network port/ router.

This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn

15