Sharp PG-D2870W Connections, You can select AUDIO 1, AUDIO 2 or HDMI in the INPUT list. See page

Equipment	Terminal on	Cable	Terminal on the
	connected equipment		projector
Audio equipment	ø3.5 mm	ø3.5 mm stereo or mono audio cable	AUDIO 1
	audio output	(commercially available or available
	terminal	as Sharp service part QCNWGA038WJPZ)
	RCA audio	RCA audio cable (commercially available)
	output		AUDIO 2
	terminal
		Cables for a camera or a video game
	Audio
	output
	terminal
	HDMI output	HDMI cable (commercially available)	HDMI
	terminal
Monitor	RGB	RGB cable (supplied or commercially	MONITOR OUT
	input	available)
	terminal
Amplifier	ø3.5 mm	ø3.5 mm stereo or mono audio cable
		(commercially available or available
	audio input	as Sharp service part QCNWGA038WJPZ)
	terminal		AUDIO OUT
	RCA audio	ø3.5 mm stereo minijack to RCA audio cable
		(commercially available)
	input
	terminal

Note

•You can also use the MONITOR OUT terminal as the COMPUTER/COMPONENT 2 terminal. To use this terminal as an output terminal, set “COMPUTER2 Select” to “Monitor Output” before connecting the external equipment. (See page 52.)

•When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable.

•You can select AUDIO 1, AUDIO 2 or HDMI in the INPUT list. (See page 30.)

•RGB signals and Component signals can be output to the monitor. HDMI input video signal would not be output.

This projector is able to process the following signals when connected to HDMI equipment:

•Video signal: For details, see “Digital Support” in the list of “Compatibility Chart” on page 64.

•Audio signal: Linear PCM audio

•Sampling frequency: 48kHz/44.1kHz/32kHz

Connections

23