Sharp PG-D2870W, PG-D3050W Setting the FUNCTION Button Operation, STANDBY Mode, STANDBY Audio Out

Setting the FUNCTION Button Operation

You can assign one of the following functions to the FUNCTION button on the remote con- trol. The assigned function can be performed by just pressing FUNCTION.

Selectable items	Description
Input Search	Automatically searches for and
	switches to the appropriate Input
	mode.
Audio Mute	For temporarily turning off the
	sound. Press FUNCTION again
	to turn on the sound
Image Shift	For moving the projected image
	vertically. (See page 47.)
Signal Info	Input signal information is displayed.

STANDBY Mode

When set to “Eco”, power consumption is reduced in Standby mode.

Selectable	Description
items
Eco	The monitor output, RS-232C and
	Network functions are switched off in
	Standby mode.
Quick Start	The monitor output, RS-232C and
	Network functions are activated even if
	the projector is in Standby mode.

STANDBY Audio Out

You can set audio output from the AUDIO OUTPUT terminal of the projector that is in Standby mode.

Selectable	Description
items
On	The audio signal is output from the
	AUDIO OUTPUT terminal in Standby
	mode.
Off	The audio signal is not output from the
	AUDIO OUTPUT terminal in Standby
	mode.

Note

•When “Eco” is selected for “STANDBY Mode”, “STANDBY Audio Out” is set to “Off” automatically and you cannot change the setting.

•The HDMI audio will not output from the AUDIO OUTPUT terminal when the projector is in Standby mode.

Menu operation n Page 40

DLP® LinkTM

See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately.

DLP® LinkTM Invert

See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately.

Returning to the Default

Settings

This function allows you to initialize the settings you have made in the projector.

Note

•The following items or menu cannot be initialized.

-Resolution

-Language

-Lamp Timer (Life)

-System Lock

-COMPUTER2 Select

Checking the Lamp

Life Status

You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).

Lamp usage condition		Remaining lamp life
	“Life”	100%	5%	Useful Features
Operated exclusively		Approx.	Approx.
with “Eco+Quiet”		4,000 hours	200 hours
set to “On”
Operated exclusively		Approx.	Approx.
with “Eco+Quiet”		2,000 hours	100 hours
set to “Off”

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.

•The lamp life may vary depending on the usage condition.

53