Sharp PG-D2870W Specifications, S-Video mini DIN 4 pin, STANDBY Mode, 41ºF to 95ºF +5ºC to +35ºC

Specifications

Model				PG-D3550W/PG-D3050W	PG-D2870W
Display devices				0.65" DLP® Chip ×1
Resolution				WXGA (1280 × 800)
Lens	F number			F 2.4 – 2.6		F 2.8
	Zoom			Manual, ×1.20		—
	Focus			Manual
				f = 19.0 – 22.7 mm		f = 10.2 mm
Input terminals	HDMI			×1
	Computer/Component			×2
	(mini D-sub 15 pin)
	S-Video (mini DIN 4 pin)			×1
	Video (RCA)			×1
	Audio (ø3.5 mm stereo minijack)			×1
	Audio (RCA)			×1 (L/R)
Output	Computer/Component			×1
terminals	(mini D-sub 15 pin)			(Shared with COMPUTER/COMPONENT 2; switchable)
	Audio (ø3.5 mm stereo minijack)			×1 (variable audio output)
Control and	LAN (RJ-45)			×1
communication	USB (Type B)			×1
terminals
	RS-232C (mini DIN 9 pin)			×1
Speaker				7W (Mono)
Projection lamp				250 W
Rated voltage				AC 100 – 240 V
Rated frequency				50/60 Hz
Input current				3.2 A
Power consumption		Eco+Quiet	AC 100 V	322 W
		Off	AC 240 V	309 W
		Eco+Quiet	AC 100 V	215 W
		On	AC 240 V	210 W
Power consumption		Quick Start	AC 100 V	4.4 W
(STANDBY Mode)			AC 240 V	5.2 W
		Eco	AC 100 V	0.32 W
			AC 240 V	0.77 W
Operation temperature				41ºF to 95ºF (+5ºC to +35ºC)
Cabinet				Plastic
Dimensions (main body only) [W × H × D]				11 52/64" × 3 1/8" × 9 19/64"
				(300 × 79 × 236 mm)
Weight (approx.)				6.2 lbs. (2.8 kg)		6.4 lbs. (2.9 kg)

As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation

figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

This SHARP projector uses a DLP® chip. This very sophisticated panel contains 1,024,000 pixels (micromirrors). As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to.

This unit has some inactive pixels within acceptable tolerances which may result in inactive dots on the picture screen. This will not affect the picture quality or the life expectancy of the unit.

68