and Operation
Introduction
Viewing ・ Listening
Recording
Set up
Others
PAN/TILT Basic Settings
Basic settings for PAN and TILT.
1 Click "PAN/TILT Settings" in the Admin. Menu.
･The sub menu for PAN/TILT Settings will appear.
2 Click "1. General" in the sub menu.
･A setup screen of "PAN/TILT - Basic Settings will appear.
3 Configure each setting items.
･Click the Save button to save settings.
･The settings will not be reflected unless the Save button is clicked.
●Function Settings
1) Set a "Scan Speed."
Fast
Slow
2)Set "Power on Default Position"
This function designates where camera moves when camera is turned on.
Center: | Moves to positions of 0｡ for PAN and 0｡ for TILT. |
Home: | Moves to Preset Number 1. |
Scan: | Starts auto panning. |
Auto Patrol: | Starts auto patrol. |
3)Set "Freeze Frame."
ON: Under "Auto Patrol", images will not be shawn while camera moves from Preset Number to next Perset Number.
OFF: No "Freeze Frame".
●Association to Alarm
1) Set "Alarm Association."
OFF: | Does nothing. "Alarm Association Type" or "Preset Num- |
| ber" cannot be set. |
Preset: | Performs preset moving when an alarm occurs. |
Auto patrol: | Starts auto patrol when an alarm occurs. |
2) Set "Alarm Association Type."
Alarm In: "Alarm In" will activate "Association to Alarm".
Motion Detection: "Motion Detection" will activate "Association to Alarm".
3)Set when "Alarm Association" is set to "Preset." Preset Number: Choose preset Number.
Resume to Previous Position:Camera moves back to position before "Assciation to Alarm" ocured.
Enable: 10, 30 and 60 seconds
Disable: Stays in the position moved to "Associa- tion to Alarm."
Introduction | |
and | Viewing |
Operation | Listening |
| ・ |
Recording | |
Set up
Others
80 | 81 |
