Table 2-1 POST Error Codes and Messages List
NOTE: To diagnose a problem, first find the BIOS error messages or codes in left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause.
BIOS Error Codes, |
| Action/FRU | |
Messages |
| ||
|
| ||
|
|
| |
Real Time Clock Error | 1. | Enter Configuration/ | |
CMOS Battery Has Failed |
| Setup Utility and load the | |
CMOS Checksum Error |
| default settings. | |
2. | CMOS battery. | ||
| |||
| 3. | System board. | |
|
|
| |
Disk Boot Failure, Insert | 1. | Insert a bootable floppy | |
System Disk And Press |
| disk into floppy drive. | |
Enter | 2. | Check if floppy drive fails. | |
| 3. Check if system board | ||
|
| fails. | |
|
|
| |
Diskette Drives Or Types | 1. | Enter Configuration/ | |
Mismatch |
| Setup Utility to | |
|
| reconfigure the drive type | |
|
| correctly. | |
|
|
| |
Display Switch Is Set | 1. | Enter Configuration/ | |
Incorrectly |
| Setup Utility to | |
|
| reconfigure Video | |
|
| Setting. | |
|
|
| |
Display Type Has Changed | 1. | Enter Configuration/ | |
Since Last Boot |
| Setup Utility to configure | |
|
| new display type. | |
| 2. | Adapter Card | |
|
|
| |
EISA Configuration | 1. | No ESIA slot available. | |
Checksum Error |
|
| |
Please Run EISA |
|
| |
Configuration Utility |
|
| |
|
|
| |
EISA Configuration Is Not | 1. | No ESIA slot available. | |
Complete |
|
| |
Please Run EISA |
|
| |
Configuration Utility |
|
| |
|
|
| |
40 IBM Desktop System HMM