IBM 2274 manual Changing Parameter Settings, Keys Function

The following table lists specific keys on the keyboard that will help you move through the Configuration/ Setup Utility Menus:

Keys	Function
Down- or up-	Use these arrow keys to highlight
arrow key	an option on the menu. (Press the
	Enter key to choose the option.)
Left- or right-	Use these arrow keys to make a
arrow key	selection and change an option's
	setting. On some menus, you can
	use these keys to move from one
	field to another.
F1	Press this key if you want help for a
	selected menu option.
Esc	After viewing or making changes to
	the settings on a menu, press this
	key to exit the menu.
Enter	Press this key to choose a
	highlighted option from a menu
F10	Press this key if you want to save
	the current settings for a line
F7	Press this key if you want to load
	the factory default settings from the
	selected brackets.
F5	Press this key if you want to restore
	item previous setting

Changing Parameter Settings

In the Configuration/Setup Utility Menus, the configuration information that you can change is enclosed in brackets like these: [ ]. You cannot change any information that is not enclosed in brackets. Use the up- or down- arrow keys to highlight options then press Enter to display a menu. When changing the setting of a particular parameter, highlight the setting then use the left- or right- arrow key to change the setting. Refer to the Configuration/ Setup Utility help for details on the configurable parameters in each menu.

General Information 15