STANDBY GENERATOR ACCESSORIES
Miscellaneous Accessory Kits
Air-Cooled Generator Sets
Model 5621 | Model 5666 |
Auxiliary Transfer Switch Contact Kit
DESCRIPTION
The auxiliary transfer switch contact kit allows a single large electrical load to be locked out from generator operation. If a home is equipped with electrical heat or multiple central air conditioning units, this device allows the generator transfer switch to interrupt the control wire, breaking the signal needed for the appliance to turn on.
INSTALLATION INFORMATION
•Once installed, the control wire must be run from the appliance to the transfer switch to connect to the contact.
Fascia Base Wrap Kit
DESCRIPTION
The fascia base wrap snaps together around the bottom the new air cooled generators. This offers a sleek, contoured appearance as well as offering protection from rodents and insects by covering the lifting holes located in the base.
Please note that this wrap only fits
Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • generac.com
©2008 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0177550SBY/Printed in U.S.A. 04.08, rev. 05.08