Lexmark 1200 Than what you have installed in your printer, To avoid another Complex Page error

Attendance messages (continued)

Message	Action
38 Memory Full	The printer is processing the job, but the memory used to store pages is full.
	• Press Go to clear the message and continue printing. Some data may not print
	or may not print correctly.
	• Cancel the print job. Press Menu> or <Menu. The Job Menu is displayed. Press
	Menu> or <Menu until Cancel Job appears on the second line. Press Select.
	To reduce the complexity of the job:
	–	Reduce the number of graphics or images on a page.
	–	Delete unnecessary downloaded fonts or macros.
	–	Change the Print Quality setting.
	• Install additional printer memory to avoid future Memory Full errors.
39 Complex Page	The text, graphics, and print information on the page require more memory to print
	than what you have installed in your printer.
	• Press Go to clear the message and continue printing. Some data may not print
	or may not print correctly.
	• Cancel the print job. Press Menu> or <Menu. The Job Menu is displayed. Press
	Menu> or <Menu until Cancel Job appears on the second line. Press Select.
	To avoid another Complex Page error:
	–	Set Page Protect On from the Setup Menu and resend the job.
	–	Reduce the complexity of the page by using fewer fonts, macros, and
		graphics.
	– Install additional printer memory.
52 Flash Full	There is not enough space available to hold the resources you want to store in
	flash memory.
	• Press Go to clear the message and continue processing. Downloaded fonts
	and macros not previously stored in flash memory or disk are deleted.
	• Reset the printer. Press Menu> or <Menu. The Job Menu is displayed. Press
	Menu> or <Menu until Reset Printer appears on the second line. Press Select.
53 Unformatted Flash	The flash memory installed in your printer has not been formatted. You must
	format the flash memory before downloading resources.
	Press Go to clear the message. To format flash memory, select Format Flash from
	the Tests Menu.
54 Parallel Error	The printer has detected a protocol error on the standard parallel interface. Check
	the cable connection between the printer and the computer, and make sure the
	cable is not defective.
	• Press Go to clear the message and continue printing. The job may not print
	correctly.
	• Reset the printer. Press Menu> or <Menu. The Job Menu is displayed. Press
	Menu> or <Menu until Reset Printer appears on the second line. Press Select.

Understanding printer messages 105