Lexmark 1200 manual You can’t collate a large job, Guide for more information, Setting

Other printing problems (continued)

Problem	Action
You can’t collate a large job.	Reduce the complexity of your print job. Eliminate the number and size of fonts,
	the number and complexity of images, and the number of pages.
	Add more printer memory. See page 65 or refer to the Setup Guide for more
	information.
	Install an optional hard disk in your printer. See page 68, or refer to the Setup
	Guide for more information.
You get unexpected page breaks.	Check the Print Timeout setting in the Setup Menu. Increase the value.
Transparencies curl excessively.	Make sure you’re using the recommended Lexmark transparencies. See
	page 76 for more information.
	Select the rear output bin when printing transparencies, rather than the top
	output bin.
Transparencies jam.	Fan transparencies before loading.
	If you just turned the printer on or the printer has been idle for a period of time,
	print on paper before trying to print on transparencies. For example, before
	printing transparencies, select Print Menus from the Tests Menu and print the
	menu settings page on a sheet of paper.
	Disabling Power Saver may also prevent transparencies from jamming after the
	printer has been idle. See page 29 for more information about the Power Saver
	setting.
	If the last transparency jams as you try to feed it from tray 1, place the
	cardboard sheet (with the cutout) included in the transparencies box in the
	bottom of tray 1 before loading transparencies.
You cannot remove paper jammed	Make sure the printer’s top cover is completely open. Opening the top cover all
in the fuser.	the way releases the fuser roll so you can easily remove jammed paper.
You cannot clear the paper jam	To clear the paper jam messages, you must remove all paper from the printer’s
message.	paper path. Check both inside the printer as well as the paper source you were
	using. Then open and close the top cover and press Go.
The page that jammed does not	Set Jam Recovery to Auto or to On in the Setup Menu. See page 31 for more
reprint after you clear the jam.	information.

Identifying other problems 117