Lexmark 1200 manual More information, Priority is posted-until you replace the photoconductors

Attendance messages (continued)

Message	Action
84 Color PC Life Warning	This message alerts you that you can print approximately 100 pages before the
	Color PC Drums Exhausted message appears. If you do not have new color
	photoconductors on hand, order them now. See page 89 for more information
	about ordering new supplies.
	Note: The cyan, magenta, and yellow photoconductors come packaged together.
	You cannot order them separately.
	Press Go to clear the message and continue printing. The Supplies status
	message is then displayed with the Ready, Power Saver, Busy and Waiting
	messages—unless another status message of higher priority is posted—until you
	replace the photoconductor.
84 Black PC Drum Exhausted	The black photoconductor has reached the end of its 13,000-page life. You may
	want to replace the photoconductor now. See page 94 for more information.
	If the print quality is still acceptable, press Go to clear the message and continue
	printing. The Supplies status message is then displayed with the Ready, Power
	Saver, Busy and Waiting messages—unless another status message of higher
	priority is posted—until you replace the photoconductor.
	When you replace the black photoconductor, make sure you also install the new
	fuser coating roll that is included in the black photoconductor kit.
84 Color PC Drums Exhausted	The three color photoconductors have reached the end of their 13,000-page life.
	You may want to replace the photoconductors now. When you do replace them,
	replace all three—cyan, magenta, and yellow—at the same time. See page 94 for
	more information.
	If the print quality is still acceptable, press Go to clear the message and continue
	printing. The Supplies status message is then displayed with the Ready, Power
	Saver, Busy and Waiting messages—unless another status message of higher
	priority is posted—until you replace the photoconductors.
84 color PC Abnormal	You have installed a defective photoconductor. You must replace the specified
	photoconductor before you can continue printing.
88 color Toner Low	The printer has detected that the toner supply in the specified cartridge is low.
	After printing approximately 250 more pages, the printer will display the 88 color
	Toner Empty message and cease operating until the toner cartridge is replaced. If
	you do not have the necessary supplies on hand, order them now. See page 89 for
	more information about ordering new supplies.
	Press Go to clear the message. The Supplies status message is then displayed
	with the Ready, Power Saver, Busy and Waiting messages—unless another status
	message of higher priority is posted—until you replace the toner cartridge. The
	88 color Toner Low message is also displayed each time you turn the printer on
	and each time you open and close the top cover.
88 color Toner Empty	The printer has detected that the specified toner cartridge is completely out of
	toner. You must install a new toner cartridge before you can continue printing. See
	page 93 for more information.

108 Chapter 7: Solving printer problems