Lexmark 1200 Paper Size Manual Pap Size A4* Country specific, Legal, Manual Env Size, Envelope

Paper Menu (continued)

Menu item	Values
Paper Size	Manual Pap Size
(continued)	A4* (Country specific)
	A5
	JIS B4
	JIS B5
	Letter* (Country specific)
	Legal
	A3
	11x17
	Universal
	Manual Env Size
	7 3/4 Envelope
	9 Envelope
	10 Envelope* (Country specific)
	DL Envelope* (Country specific)
	C5 Envelope
	B5 Envelope
	Other Envelope
	The Paper Size setting identifies the default formatting size for each paper source. See
	page 73 for a list of the dimensions for each paper and envelope size.
	Trays 1, 2, and 3 have size sensing. The printer automatically determines the size of the paper
	installed in the tray and displays only that size as the default in the Paper Size menu. You
	cannot change the default paper size for these trays from the operator panel. To set the paper
	size, adjust the rear paper guide to the appropriate position in the tray. See page 72 for a
	listing of the paper sizes the trays support.
	The printer can only recognize A3 and B4 size paper or 11x17 and legal size paper. You must
	decide which of the pairs of paper sizes you want your trays to support. (You can still load the
	paper sizes you don’t select in the multipurpose feeder.) Select the appropriate setting from
	the Size Detection menu item. See page 21 for more information.
	For paper and envelope sources without size sensing (manual feed and the multipurpose
	feeder), it is important to select the correct paper size from the menu. The MP Feeder Size
	menu item is displayed only if the Configure MP menu item is set to Cassette.
	Select Universal from the Paper Size menu when you load media in the multipurpose feeder
	that doesn’t match any of the standard sizes. The printer formats the page for 11.7 x 17 in.
	(297 x 432 mm). You can then set the margins for the actual page size from your software
	application.
*Factory default

Menus 17