Lexmark 1200 manual Mended setting

Fax Menu (continued)

Menu item		Values
Fax Parity		Even
		Odd
		None*
		Ignore
		This setting lets you select the parity for the input and output data frames. Refer to the
		Technical Reference for more information about parity.
Fax Buffer	Disabled
		Auto*
		3K to maximum size allowed
		You can configure the size of the fax input buffer to meet the requirements of your system. If
		the limited size of the input buffer is preventing you from continuing work in your application
		each time you receive a fax, you may want to increase the buffer size.
		The maximum size depends on the amount of memory in your printer, the size of the other link
		buffers, and whether the Resource Save setting is On or Off. To maximize the range for the
		Fax Buffer size, you can disable or reduce the size of the parallel, serial, network, infrared, or
		LocalTalk buffer. Choose the Auto setting to let the printer automatically calculate a buffer size
		proportional to the total amount of available printer memory. In most cases, Auto is the recom-
		mended setting.
		See page 67 for a listing of the default buffer sizes for all the interface ports.
		Note: Changing the Fax Buffer setting automatically resets the printer.
*Factory default

56 Chapter 2: Changing printer settings