Feeding media manually

You can also use the multipurpose feeder to feed single sheets of paper, transparencies, card stock, labels, or indi- vidual envelopes.

To print a page manually:

1 Select Manual Paper or Manual Envelope as the paper

source from the operator panel or from MarkVi- sion:

aPress Menu> or <Menu to enter the menus.

Paper Menu appears on the second line of the dis- play.

bPress Select to open the Paper Menu.

The Paper Source menu item appears on the sec- ond line of the display.

cPress Select to select Paper Source.

dPress and release Menu> until Manual Paper or Manual Env appears on the second line of the display.

ePress Select to set the paper source.

fPress Go to return the printer to the ready state.

2 Select the paper size.

Since the multipurpose feeder does not automati- cally sense the size of the media you load, you must select the correct paper size for each job.

You can set the paper size from your software appli- cation or driver, or follow the instructions below to set the paper size from the operator panel or from MarkVision:

aPress Menu> or <Menu to enter the menus.

Paper Menu appears on the second line of the dis- play.

bPress Select to open the Paper Menu.

Using the multipurpose feeder

85

Page 99
Image 99
Lexmark 1200 Feeding media manually