Lexmark 1200 manual Or blinds, Turn the printer power off, Turn the modem power on

Other printing problems (continued)

Problem	Action
You cannot print color.	Make sure the Color Correction menu item is not set to Black & White.
	Make sure you’re using a color printer driver.
	Make sure color printing is selected from the printer driver.
	Make sure the color print units are completely installed in the printer.
	Make sure the system board is completely inserted in the printer and the thumb-
	screws are securely tightened. Refer to the Setup Guide for installation
	instructions.
You cannot print the menu	Make sure the selected paper source holds A4, letter, or legal size paper. The
settings page.	menu settings page can only print on those paper sizes. Make sure the
	Paper Type setting for the selected source is Plain Paper.
You cannot print using the	Make sure neither Infrared Port nor Infrared Buffer is set to Disabled in the
infrared port.	Infrared Menu. Also check the Window Size and Transmit Delay settings. See
	page 51 for suggestions about changing these settings.
	Make sure the distance between the two infrared ports is 3 m (10 ft) or less. If
	necessary, move the ports closer together.
	Make sure no objects are between the two ports.
	Make sure the computer is set on a level surface.
	Bright light, such as direct sunshine or nearby artificial lights, may interfere with
	communication. If necessary, turn off lights in the room or close window shades
	or blinds.
You cannot print using the	Make sure neither LocalTalk Port nor LocalTalk Buffer is set to Disabled in the
LocalTalk port.	LocalTalk Menu.
	Verify that the printer is set up correctly in the Macintosh Chooser.
You cannot receive faxes via the	Make sure neither Fax Port nor Fax Buffer is set to Disabled in the Fax Menu.
fax port.
	Make sure the fax machine you have connected to your printer is a class 1 fax
	modem.
	If power to the modem has been interrupted, complete the following steps in the
	order listed:
	1 Turn the printer power off.
	2	Turn the modem power on.
	3	Turn the printer power on.

Identifying other problems 115