Lexmark 1200 manual Parallel Option x Error

Attendance messages (continued)

Message	Action
54 Parallel Option x Error	The printer has detected a protocol error on the specified parallel interface. Check
	the cable connection between the printer and the computer, and make sure the
	cable is not defective.
	• Press Go to clear the message and continue printing. The job may not print
	correctly.
	• Reset the printer. Press Menu> or <Menu. The Job Menu is displayed. Press
	Menu> or <Menu until Reset Printer appears on the second line. Press Select.
54 Serial Option x Error	The printer has detected a protocol error on the specified serial interface. Make
	sure the serial interface parameters are set up correctly and you are using an
	appropriate serial cable.
	• Press Go to clear the message and continue printing. The job may not print
	correctly.
	• Reset the printer. Press Menu> or <Menu. The Job Menu is displayed. Press
	Menu> or <Menu until Reset Printer appears on the second line. Press Select.
54 Std Par ENA	An external network adapter (ENA) that was once connected to the standard
Connection Lost	parallel port is no longer responding. The printer only recognizes the missing
	connection when the printer power is first turned on.
	• Make sure the cable connecting the ENA and the printer is securely attached.
	Turn the printer off and then on again to see if the printer recognizes the
	connection.
	• Press Go to clear the message. The printer erases any reference to the ENA
	and then resets.
54 Par x ENA Connection Lost	An external network adapter (ENA) that was once connected to the specified
	parallel port is no longer responding. The printer only recognizes the missing
	connection when the printer power is first turned on.
	• Make sure the cable connecting the ENA and the printer is securely attached.
	Turn the printer off and then on again to see if the printer recognizes the
	connection.
	• Press Go to clear the message. The printer erases any reference to the ENA
	and then resets.
56 Std Parallel Port Disabled	Data was sent to the standard parallel port, but the port has been disabled from
	the Parallel Buffer menu item.
	• Press Go to clear the message. The printer discards the data sent to the
	parallel port.
	• Reset the printer. Press Menu> or <Menu. The Job Menu is displayed. Press
	Menu> or <Menu until Reset Printer appears on the second line. Press Select.
56 Parallel Port x Disabled	Data was sent to the specified parallel port, but the port has been disabled from
	the Parallel Buffer menu item.
	• Press Go to clear the message. The printer discards the data sent to the
	parallel port.
	• Reset the printer. Press Menu> or <Menu. The Job Menu is displayed. Press
	Menu> or <Menu until Reset Printer appears on the second line. Press Select.

106 Chapter 7: Solving printer problems