Lexmark 1200 manual Serial Buffer menu item, Port, Disk functions, Defective and need replacing

Attendance messages (continued)

Message	Action
56 Serial x Port Disabled	Data was sent to the specified serial port, but the port has been disabled from the
	Serial Buffer menu item.
	• Press Go to clear the message. The printer discards the data sent to the serial
	port.
	• Reset the printer. Press Menu> or <Menu. The Job Menu is displayed. Press
	Menu> or <Menu until Reset Printer appears on the second line. Press Select.
61 Defective Disk	The hard disk installed in your printer is defective. Press Go to clear the message
	and continue printing. You must install a different disk before you can perform any
	disk functions.
62 Disk Full	There is not enough space available to hold the resources you want to store on
	disk.
	• Press Go to clear the message and continue processing. Downloaded fonts
	and macros not previously stored in flash memory or disk are deleted.
	• Reset the printer. Press Menu> or <Menu. The Job Menu is displayed. Press
	Menu> or <Menu until Reset Printer appears on the second line. Press Select.
63 Unformatted Disk	The hard disk installed in your printer has not been formatted. You must format the
	disk before you can downloading resources to it.
	Press Go to clear the message. If the error message remains, the disk may be
	defective and need replacing.
	To format the disk, select Format Disk from the Tests Menu.
70–79 Network	Reserved for messages relating to the optional internal network adapter (INA)
	installed in your printer. For more information, refer to the online documentation
	included on the printer CD under “Network Printing.”
80 Scheduled Maintenance	The printer requires replacement of routine maintenance items, such as the fuser
	and transport belt, to maintain top performance and avoid print quality and paper
	feed problems. These items are in a maintenance kit available from Lexmark. You
	must have a trained service technician install the maintenance kit. See “Replacing
	service items” on page 98 for more information.
	The message appears when the printer maintenance counter determines 100,000
	pages have printed. Failure to replace the maintenance kit items will not interrupt
	printer operation, but can result in unsatisfactory printer performance.
84 Black PC Life Warning	This message alerts you that you can print approximately 100 pages before the
	Black PC Drum Exhausted message appears. If you do not have a black photo-
	conductor kit on hand, order it now. See page 89 for more information about
	ordering new supplies.
	Press Go to clear the message and continue printing. The Supplies status
	message is then displayed with the Ready, Power Saver, Busy and Waiting
	messages—unless another status message of higher priority is posted—until you
	replace the photoconductor.

Understanding printer messages 107