fPress Go to return the printer to the ready state.

2 Select the paper size.

Since the multipurpose feeder does not automati- cally sense the size of the media you loaded, you must select the correct paper size.

If you set the size from your software application or driver, press Go when the message Load MP Tray appears on the display. Follow the instructions below to set the size from the operator panel or from MarkVision:

aPress Menu> or <Menu to enter the menus.

Paper Menu appears on the second line of the dis- play.

bPress Select to open the Paper menu.

cPress Menu> until PAPER SIZE appears on the second line of the display.

dPress Select to select Paper Size.

ePress and release Menu> until MP Feeder Size appears on the second line of the display.

fPress Select to open a list of paper and envelope sizes.

gPress Menu> or <Menu to scroll through the list of sizes.

hWhen the size you need appears on the second line of the display, press Select.

iPress Go to return the printer to the ready state.

3 Make sure the Paper Type setting is appropriate for the media you’re loading in the feeder.

See page 18 or refer to the Setup Guide for more information about the Paper Type setting.

4 When the printer is in the ready state, send the job to print.

84 Chapter 5: Paper handling

Page 98
Image 98
Lexmark 1200 manual Press Menu or Menu to enter the menus