Lexmark 1200 manual Using the multipurpose feeder, Printing from the multipurpose feeder

Using the multipurpose feeder

Printing from the multipurpose feeder

The multipurpose feeder holds 100 sheets of paper,

30 transparencies, 30 sheets of labels, or 15 envelopes. Refer to the Setup Guide for instructions for loading media in the multipurpose feeder.

If you want to use the multipurpose feeder like you use the other trays, make sure the Configure MP menu item in the Paper Menu is set to Cassette.

You can also use the multipurpose feeder to manually feed a single sheet or envelope. See page 85 for more infor- mation about manual feed.

Since the multipurpose feeder does not have auto size sensing, you must select the correct paper size and type from the printer operator panel or from MarkVision before you send a job to print.

1 Select MP Feeder as the paper source.

From the printer operator panel or from MarkVi- sion:

aPress Menu> or <Menu to enter the menus.

Paper Menu appears on the second line of the dis- play.

bPress Select to open the Paper Menu.

The Paper Source menu item appears on the sec- ond line of the display.

cPress Select to select Paper Source.

dPress and release Menu> until MP Feeder appears on the second line of the display.

ePress Select to set the multipurpose feeder as the paper source.

Using the multipurpose feeder 83