Setup Menu (continued)

Menu item

 

Values

 

 

 

Download Target

 

RAM*

 

 

Flash

 

 

Disk

 

 

 

 

 

 

The Download Target menu item specifies where you want to store downloaded resources.

 

 

Storing downloaded resources in flash memory or an optional hard disk is permanent storage

 

 

rather than the temporary storage that RAM provides. You can add resources to flash memory

 

 

or disk until the device is full. Use your software application or the MarkVision printer utility to

 

 

download resources to the printer.

 

 

The Download Target menu item is only displayed if the flash memory or hard disk is not

 

 

defective or Read/Write or Write protected. Disk is not an available value for Download Target

 

 

if Job Buffer Size is set to 100%.

 

 

Print Timeout

Disabled

 

 

1…255 (90*)

 

 

 

 

 

 

The Print Timeout setting determines the time (from 1 to 255 seconds) the printer waits before

 

 

printing the last page of a print job that does not end with a command to print the page. The

 

 

print timeout counter does not start until the printer displays the Waiting message.

 

 

When a print timeout occurs, the printer stores the page in the print buffer.

 

 

When Print Timeout is disabled, the printer does not print the last page of a print job until one

 

 

of the following occurs:

 

 

• The printer receives enough information to fill the page.

 

 

• The printer receives a Form Feed command.

 

 

• You select Print Buffer from the Job Menu. See page 28 for more information.

 

 

Wait Timeout

Disabled

 

 

15…65535 (40*)

 

 

 

 

 

 

The Wait Timeout setting determines the amount of time in seconds the printer waits to

 

 

receive additional bytes of PostScript data from the computer. When this timeout expires, the

 

 

print job is canceled. Select Disabled to turn Wait Timeout off.

 

 

The Wait Timeout menu item is only available when using PostScript Level 2 emulation. The

 

 

setting has no effect on PCL emulation print jobs.

 

 

 

 

*Factory default

 

 

 

 

 

 

 

30 Chapter 2: Changing printer settings

Page 44
Image 44
Lexmark 1200 manual Download Target, Flash, Disk, Download resources to the printer, If Job Buffer Size is set to 100%