Tests Menu (continued)

Menu item

 

Values

 

 

 

Format Flash

 

Yes

 

 

No

 

 

 

 

 

 

Formatting flash memory deletes all resources (fonts, macros) stored in flash memory and

 

 

prepares flash memory to receive new resources. You may want to select Print Directory

 

 

before you format the flash memory to determine what resources, if any, are stored in flash.

 

 

The Format Flash menu item is not displayed if the flash memory is Read/Write or Write

 

 

protected.

 

 

Warning: If you select Format Flash and then press Go, any data stored in flash memory is

 

 

lost. Do not turn the printer off while the flash is formatting.

 

 

 

Format Disk

 

Yes

 

 

No

 

 

 

 

 

 

Formatting the hard disk option deletes all resources stored on the hard disk and prepares the

 

 

disk to receive new resources. You may want to select Print Directory before you format the

 

 

disk to determine what resources, if any, are stored on the disk.

 

 

The Format Disk menu item is not displayed if the installed option is defective or is Read/Write

 

 

or Write protected. Format Disk is also not displayed if Job Buffer Size is set to 100%.

 

 

Warning: If you select Format Disk and then press Go, any data stored on the hard disk is

 

 

lost. Do not turn the printer off while the hard disk is formatting.

 

 

Job Acct Stat

Print

 

 

Clear

 

 

 

 

 

 

If you have an optional disk installed in your printer and you are using the printer’s Job

 

 

Accounting function, you can choose to print a list of statistics for a defined number of the

 

 

most recent print jobs. (The number of jobs is determined by the value of the Job Acct Limit

 

 

menu item in the Setup Menu.) The statistics include whether the job printed with or without

 

 

errors, the time required to print the job, the size (in bytes) of the job, the requested paper size

 

 

and paper type, the total number of printed pages, and the number of copies requested.

 

 

Select Clear to delete all accumulated job statistics from the optional disk.

 

 

Note: You cannot print a list of statistics if the disk is read/write protected. You cannot clear

 

 

job statistics from the disk if the disk is write protected or read/write protected.

 

 

 

Hex Trace

 

Press Select to enter Hex Trace mode.

 

 

Hex Trace helps isolate the source of a print job problem. With Hex Trace selected, all data

 

 

sent to the printer is printed in hexadecimal and character representation. Control codes are

 

 

not executed.

 

 

To exit Hex Trace, turn the printer off, or reset the printer. To reset the printer, press Menu> or

 

 

<Menu. The Job Menu is displayed. Press Menu> or <Menu until Reset Printer is on the

 

 

second line. Press Select.

 

 

 

 

Menus 27

Page 41
Image 41
Lexmark 1200 manual Format Disk Yes, Second line. Press Select