Multipurpose feeder

Notch

Loading transparencies

Before loading transparencies, fan the stack to prevent sheets from sticking together. To prevent print quality problems, avoid getting fingerprints on the transparen- cies.

Load transparencies only in the multipurpose feeder or tray 1. Your printer does not feed transparencies from tray 2 or tray 3.

Load transparencies with the corner notch oriented as shown. This properly positions the specially coated print side. For more information, refer to the detailed loading instructions packaged with the transparencies.

Note: To create a straight paper path and minimize curling, load transparencies in the multi- purpose feeder and stack them in the rear output bin.

Tray 1

Notch

Cardboard

When loading transparencies in tray 1, use the piece of cardboard with the rectangular cutout that comes with the transparencies. Place the cardboard in the bottom of the tray before loading transparencies. The cardboard ensures proper feeding of the last transparency in the stack.

Only use the cardboard when loading transparencies in tray 1. Do not use the cardboard in the multipurpose feeder.

Media guidelines 77

Page 91
Image 91
Lexmark 1200 manual Loading transparencies