Lexmark 1200 manual Pages

Setup Menu (continued)

Menu item		Values
Auto Continue	Disabled*
		5…255
		Set Auto Continue to a value between 5 seconds and 255 seconds to have the printer
		automatically continue operating after it detects one of the following errors:
	35		Res Save Off Deficient Memory
	37		Insufficient Collation Area
	38		Memory Full
		39 Complex Page
	52		Flash Full
	53		Unformatted Flash
	54		Parallel Error
	54		Parallel Option x Error
	54		Serial Option x Error
	54		Std Par ENA Connection Lost
	54		Par x ENA Connection Lost
	56		Std Parallel Port Disabled
	56		Parallel Port x Disabled
	56		Serial x Port Disabled
	61		Defective Disk
	62		Disk Full
	63		Unformatted Disk
	80		Scheduled Maintenance
		Print Jobs on Disk?
		If one of these errors occurs and Auto Continue is disabled, the printer stops and waits for
		operator intervention. When Auto Continue is set to a numerical value, the printer waits for
		operator intervention for the specified length of time and then automatically resumes
		processing.
		The Auto Continue value has one other purpose. If the operator panel has displayed menu
		information for the specified period of time without a button being pressed, the printer
		automatically exits the menus and returns to the ready state.
Jam Recovery		On
		Off
		Auto*
		When Jam Recovery is set Off, the printer does not reprint a page that has jammed.
		When Jam Recovery is set On, the printer keeps the image for a printed page until the printer
		signals that the page has successfully exited the printer. The printer reprints all jammed
		pages.
		If Jam Recovery is set to Auto, the printer keeps the image and reprints the page unless the
		memory required to hold the page is needed for other printer tasks.
*Factory default

Menus 31