Custom Setup
8
ENT.
RETURN | 9 |
SETUP
Custom Setup Operation
• Custom Setup Operation is performed by the remote control unit.
The following 5 steps are common to each of the Custom Setup settings. Refer to the specific section for details.
1Press SETUP before inserting a disc, or when in stop mode.
The setup menu appears on the monitor.
S E T U P
L A N G | U | A G E S |
|
|
|
T V S C R E E N | 1 6 : | 9 | ( W I D E ) | ||
C O U N T R Y C O D E U S – | 8 | 5 8 3 | |||
P A R E N T A L | O F F |
|
| ||
D I G I | T A L O U T |
|
|
| |
C U S T O M S E T U P
2Press 8 or 9 to select “CUSTOM SETUP”, then press ENT.
3Press 8 or 9 to select your desired setting item, then press ENT.
CUSTOM SETUP items:
CD PLAY MODE / VCD PLAY MODE / PAUSE MODE / DOWNMIX MODE
S E T U P
C U S T O M S E T U P |
|
C D P L A Y M O D E | C D - D A |
V C D P L A Y M O D E | P B C O N |
P A U S E M O D E | A U T O |
D O W N M I X M O D E | S U R R O U N D |
4Press 8 or 9 to change the setting, then press
ENT.
5Press RETURN repeatedly until the SETUP mode is deactivated.
•When settings are changed, old settings are overwritten. Make a note of the current settings before making changes. If the vehicle’s battery is disconnected, the settings will be cleared and will return to the factory settings.
Setting the CD Play Mode
The unit can be set to play only the audio data or only the MP3/WMA files on discs containing both audio data and MP3/WMA data.
Setting item: CD PLAY MODE
Setting contents:
| Only CD data can be played |
| back. |
COMPRESSED AUDIO: Only MP3/WMA data can be played back.
The initial setting at the factory is
•If a disc has already been inserted, perform the setting after you remove the disc.
•The setting cannot be carried out if an MP3 compatible changer is used.
Setting the Video CD Play Mode
When playing a Playback Control (PBC) enabled video CD, you can choose to set PBC ON or OFF.
Setting item: VCD PLAY MODE
Setting contents: PBC ON / PBC OFF
PBC ON: The PBC menu is displayed.
PBC OFF: The PBC menu is not displayed.
The initial setting at the factory is PBC ON.
Setting the Pause Mode
In pause mode, screen blurring may occur. To overcome this, set AUTO/FIELD/FRAME accordingly.
Setting item: PAUSE MODE
Setting contents: AUTO / FIELD / FRAME
If you experience blurring during pause mode, set to FIELD or FRAME.
The initial setting at the factory is AUTO.
Setting the Downmix Mode
This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: STEREO / SURROUND ENCODED
STEREO: | Stereo Downmix |
SURROUND ENCODED: Dolby surround compatible Downmix
The initial setting at the factory is SURROUND ENCODED.
