Picture is unclear or noisy.
•Disc is being
-The picture may be unclear, but this is normal.
•Vehicle’s battery power is weak.
-Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11 volts with a load applied.)
•Monitor’s fluorescent tube is worn out.
-Replace the monitor’s fluorescent tube.
Image stops sometimes.
•Disc is scratched.
- Replace with a
Indication for CD Player
HI TEMP
•Protective circuit is activated due to high temperature.
-The indicaton will disappear when the temperature returns to normal operating range.
NO DISC
•No CD is inserted.
-Insert a CD.
•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.
-Remove the disc by following these steps:
Press the c button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
Indication for DVD/Video CD Player
|
|
|
DISC ERROR |
| ERROR |
|
| (Audio display) |
|
|
|
(Monitor display)
•Mechanism error.
1)Press c and eject the disc.
If the disc does not eject, press c again for at least 2 seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2)When the error indication remains after ejecting, press c again.
If the error indication still does not turn off after pressing c a few times, consult your Alpine dealer.
NO DISC
NO DISC
(Audio display)
(Monitor display)
•No disc is inserted.
-Insert a disc.
•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.
-Remove the disc by following step: Press c again for at least 2 seconds.
ERROR
•Mechanism error.
1)Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2)When the error indication remains after ejecting, press the c button again.
If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.
•When “ERROR” is displayed:
If that the disc cannot be ejected by pressing c, press the RESET switch (refer to page 8) and press c again.
If the disc still cannot be ejected, consult your Alpine dealer.
PROTECT
•A
- You can only play back
(Monitor display)
•Remote control operation is not possible.
-For some discs or playing modes, certain operations are not possible. This is not a malfunction.
|
|
|
|
|
| ERROR |
|
REGIONAL CODE |
| (Audio display) | |
VIOLATION |
| ||
|
|
| |
|
|
|
|
(Monitor display)
•Disc does not match regional code number.
- Load a disc that matches the regional code number.
UNSUPPORT
•The disc is not written in a MP3/WMA supported format. - Use a disc written at the MP3/WMA supported format.
|
|
|
| HI TEMP | |
|
| (Audio display) |
|
|
|
(Monitor display)
•Protective circuit is activated at high temperature.
-The indicaton will disappear when the temperature returns to normal operating range.
-Leave the power OFF until the temperature decreases and then turn the power ON again.
