Installing the Power Supply Unit

Caution

Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.

Air ventilation hole

<Side of the Power Supply Unit>

When mounting with Velcro fasteners

When mounting the Power Supply Unit with the Velcro fasteners, be sure to choose a flat location.

Do not hang the unit from the bottom of the dashboard or rear deck with the Velcro fasteners.

1Remove the Protective paper and attach two pieces of Velcro fastener to the bottom of the Power Supply Unit.

 

Power Supply Unit

 

Protective paper

 

Velcro Fasteners

Protective paper

(Included)

2Check the position, and then fix the Power Supply Unit to the floor carpet.

When mounting with Screws

When mounting the Power Supply Unit with the screws, be sure to choose a flat location.

When making holes, be careful not to scratch any pipes or wires.

Install the Power Supply Unit on the floor with the supplied flange-head tapping screws (M4 14).

Flange-head tapping screws (M4 14) (Included)

Power Supply Unit

67-EN

Page 69
Image 69
Alpine DVA-9965 owner manual 67-EN, Installing the Power Supply Unit, When mounting with Velcro fasteners