Alpine DVA-9965 Recalling the Stored Time Correction Settings, Setting the MX Mode, 27-EN

7Select any one of the preset numbers (1 through 6) by sliding your finger on the GlideTouch bar to the left or right. Press and hold the GlideTouch bar under the desired preset for at least 2 seconds. The adjustments are saved in the selected preset.

8After setting, press and hold MENU for at least 2 seconds to return to normal mode.

•If MENU is pressed while adjusting or setting the items in the MENU mode, the unit returns to the previous selection screen.

•By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

•If no operation is performed for seconds, the unit will return to the normal mode.

Recalling the Stored Time Correction Settings

1Press and hold MENU for at least 2 seconds.

2Select the Time Correction mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Time Correction mode.

3Press FUNC. or the GlideTouch bar to activate the preset mode.

4Select any one of the preset numbers (1 through 6) by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired preset to recall the stored contents.

5Press and hold MENU for at least 2 seconds to return to normal mode.

•If MENU is pressed while adjusting or setting the items in the MENU mode, the unit returns to the previous selection screen.

•By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

Setting the MX Mode

MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The FM radio, CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise.

1Press MENU.

2Select the Media Xpander mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Media Xpander mode.

3Press the GlideTouch bar under ON to activate MX.

4After setting, press and hold MENU for at least 2 seconds to return to normal mode.

5Press SOURCE/POWER to select the source to which you want to apply MX (Media Xpander).

6Press and hold MENU for at least 2 seconds.

7Select the Media Xpander mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Media Xpander mode.

8Select the MX Level by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired level or OFF (Non Effect).

FM (MX level 1 to 3):

The medium to high frequencies become clearer, and produces well balanced sound at all frequencies.

CD (MX level 1 to 3):

CD mode processes a large amount of data during playback. MX takes advantage of this large data quantity to reproduce a more clear, clean output.

CMPM/SAT (MX level 1 to 3):

This corrects information that was lost at the time of compression. This reproduces a well-balanced sound close to the original.

DVD (Video CD) (MOVIE MX level 1 to 2):

The dialogue portion of a video is reproduced more clearly.

(DVD MUSIC):

A DVD or Video CD contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately.

AUX (MX level 1):

Choose the MX mode (CMPM, MOVIE, or MUSIC) that corresponds to the media connected.

If two external devices are connected, a different MX mode for each media can be selected.

9After setting, press and hold MENU for at least 2 seconds to return to normal mode.

•To cancel MX mode for all music sources, set MX to OFF in step 3.

•Each music source, such as FM radio, CD, and MP3/WMA can have its own MX setting.

•On discs with both MP3/WMA and CD-DA, when the source changes from “MP3/WMA to CD-DA” or “CD-DA to MP3/ WMA”, MX-mode switching may delay playback slightly.

•Setting to MX OFF sets MX mode of each music source to OFF.

•This function is inoperable when DEFEAT is set to ON.

•There is no MX mode for AM radio.

•If an audio processor with the MX function (PXA-H701, etc.) is connected, its own MX processing is applied to the music source. Since the processor MX settings may not match the head unit, the audio processor needs to be adjusted. For details, refer to the Owner’s Manual of the audio processor.

•“CMPM” is applied for MP3/WMA, WAV and iPod.

•“SAT” is applied for XM radio and SIRIUS radio.

•If MENU is pressed while adjusting or setting the items in the MENU mode, the unit returns to the previous selection screen.

•By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

•If no operation is performed for 60 seconds, the unit will return to the normal mode.

27-EN