P100IH ISDN Router
Configuring a Server behind NAT
Follow the steps below to configure a server behind NAT:
Step 1. Enter 15 in the main menu to go to Menu 15 – NAT Setup.
Step 2. Enter 2 to go to Menu 15.2 - NAT Server Setup.
Menu 15.2 - NAT Server Sets
1.Server Set 1 (Used for SUA Only)
2.Server Set 2
3.Server Set 3
4.Server Set 4
5.Server Set 5
6.Server Set 6
7.Server Set 7
8.Server Set 8
9.Server Set 9
10.Server Set 10
Enter Set Number to Edit:
Figure 4-13 Menu 15.2 – NAT Server Sets
Step 3. Enter the index number of the set you want to configure. This brings up menu 15.2.X where X is the index number.
Step 4. Enter the service port number in the Port # field and the inside IP address of the server in the IP Address field.
Menu 15.2.2 - Multiple Server Configuration
Port # | IP Address |
----
1.Default | 0.0.0.0 |
2.21192.168.1.33
3.23192.168.1.34
4.25192.168.1.35
5.80192.168.1.36
6. | 0 | 0.0.0.0 |
7. | 0 | 0.0.0.0 |
8. | 0 | 0.0.0.0 |
9. | 0 | 0.0.0.0 |
10. | 0 | 0.0.0.0 |
11. | 0 | 0.0.0.0 |
12. | 0 | 0.0.0.0 |
Press ENTER to Confirm or ESC to Cancel:
Figure 4-14 Menu 15.2.1 –Multiple Server Configuration
NAT |
