GAK; Reviewed:
WCH 7/7/2003 Solution & Interoperability Test Lab Application Notes
©2003 Avaya Inc. All Rights Reserved. 8 of 31
intel-lag-notes.doc
Figure 9: Switch Port Configuration for Port 3.12
4. Select vlan100 from the Port VLAN drop-down menu.
5. Select IEEE 802.1Q from the Trunk Mode drop-down menu.
6. Click the APPLY button.
Notes: It is only necessary to configure VLAN information for the first port that will be
added to the Hunt Group. When the first port is added to the Hunt Group, it is designated as
the “Base Port” and all other member ports will assume the identity of the base port.
Unknown unicast and broadcast traffic is flooded on the base port only. If multiple VLANs
are being statically mapped (via the CLI) to Hunt Group member ports, then each member
port must be configured with the VLANs individually before configuring them as Hunt
Group members.