ZyXEL Communications 1001H manual Time and Date Setting Fields, System Maintenance 11-25

P100IH ISDN Router

Table 11-7 Time and Date Setting Fields

Field

Description

Use Time Server when	Enter the time service protocol that your timeserver will send when the
Bootup=	Prestige powers up. Choices are Daytime (RFC 867), Time (RFC-868),
	NTP (RFC-1305)and None. The main differences between them are the
	format, e.g., the Daytime (RFC 867) format is day/month/date/year/time
	zone of the server while the Time (RFC-868)format gives a 4-byte
	integer giving the total number of seconds since 1/1/1970 at 0:0:0. The
	NTP (RFC-1305)format is similar. Not all timeservers support all
	protocols, so you may have to check with your ISP/network administrator
	or use trial and error to find a protocol that works. If you select None
	(this is the default value), you can enter the time manually but each time
	the system is booted, the time & date will be reset to 1970-1-1 0:0:0.
Time Server IP	Enter the IP address of the your timeserver. Check with your
Address=	ISP/network administrator if you are unsure of this information.
Current Time:
New Time	Enter the new time in hour, minute and second format.
Current Date:
New Date	Enter the new date in year, month and date format.
Time Zone= GMT+0800	Press the [SPACE BAR] to set the time difference between your time
	zone and Greenwich mean Time (GMT). Be aware if/when daylight
	savings time alters this time difference for your time zone.

Once you have filled in the new time and date, press [Enter] to save the setting and press [Esc] to return to Menu 24.

System Maintenance 11-25