ZyXEL Communications 1001H manual Preface, Ethernet Setup Information

Models: 1001H

1 160
Download 160 pages 37.84 Kb
Page 17
Image 17

P100IH ISDN Router

Preface

About Your Prestige

Congratulations on your purchase of the Prestige ISDN Router. Don’t forget to register your Prestige (fast, easy online registration at www.zyxel.com) for free future product updates and information.

The Prestige 100IH is a high-performance routers that offer complete solutions for your WAN (Wide Area Network) applications such as Internet access, LAN-to-LAN connections, telecommuting and remote access over ISDN (Integrated Service Digital Network).

You do not need to set any switches to configure the Prestige. The user-friendly Prestige Web Configurator (PWC) is a JAVA based utility that allows you to manage the Prestige via a Worldwide Web browser. You can also manage the Prestige via the SMT (System Management Terminal), a menu-driven interface that you can access from either a terminal emulator or telnet.

Setup Information

ISDN Line

1.Contact your local telephone company’s ISDN Ordering Center to find out what type of ISDN service is available and the switch type.

2.When the telephone company installs your ISDN line, please be sure to obtain and write down the following information for future use:

a.ISDN switch type

b.ISDN telephone number(s)

Supplemental services such as Call Forwarding are supported by the Prestige but must be subscribed to separately from the telephone company.

Ethernet Setup Information

IP Address - The IP Address is the unique 32-bit number assigned to your Prestige. This address is written in dotted decimal notation (four 8-bit numbers, between 0 and 255, separated by periods), e.g., 192.168.1.1.

Please note that every machine on a network must have a unique IP address - do not assign an arbitrary address to any machine. If you are not sure as to which IP address to assign to the Prestige, contact your Internet Service Provider (ISP) or refer to Chapter 3 of this guide for more details.

IP Subnet Mask - An IP address consists of two parts, the network ID and the host ID. The IP Subnet Mask is used to specify the network ID portion of the address, expressed in dotted decimal notation. The Prestige automatically calculates this mask based on the IP address that you assign. Unless you have a special need for subnetting, use the default mask as calculated by the Prestige.

Preface

xv

Page 17
Image 17
ZyXEL Communications 1001H manual Preface, Ethernet Setup Information