ZyXEL Communications 1001H manual Edit IP Static Route Menu Fields, Field Description

P100IH ISDN Router

The following table describes the fields for Menu 12.1.1 – Edit IP Static Route Setup.

	Table 6-3 Edit IP Static Route Menu Fields
Field	Description
Route Name	Enter a descriptive name for this route. This is for identification purpose only.
Active	This field allows you to activate/deactivate this static route.
Destination IP Address	This parameter specifies the IP network address of the final destination.
	Routing is always based on network number. If you need to specify a route to a
	single host, use a subnet mask of 255.255.255.255 in the subnet mask field to
	force the network number to be identical to the host ID.
IP Subnet Mask	Enter the subnet mask for this destination. Follow the discussion on IP subnet
	mask in this chapter.
Gateway IP Address	Enter the IP address of the gateway. The gateway is an immediate neighbor of
	your Prestige that will forward the packet to the destination. On the LAN, the
	gateway must be a router on the same segment as your Prestige; over WAN,
	the gateway must be the IP address of one of the remote nodes.
Metric	Same meaning as those in the Remote Node Setup.
Private	Same meaning as those in the Remote Node Setup.

Remote Node TCP/IP Configuration 6-7