C4230 | Quick Reference Guide |
HOW TO CONNECT YOUR C4230 PHONE
THE C4230 PHONE IS DESK
MOUNTABLE ONLY.
Wall phone jack
Phone cord
AC adapter, connect to 120V power source and phone
The phone cord plugs into the C4230 phone base as shown above. Plug the other end of the phone cord into a telephone wall jack.
Connect the AC adapter to the back of the base and a 120V wall outlet as shown above.
To avoid potential interference, the phone should not be located near electronic equipment, such as personal computers, televisions or microwave ovens.
HOW TO DIAL OR RECEIVE A CALL
1.Complete connection instructions shown in this guide.
2.Install and charge battery as shown on page
3.Make sure Red LED light is on at bottom of base.
HANDSET
4.To answer a call, press TALK on the handset.
5.When placing a call press TALK and dial number.
6.After completing a call press TALK again and return handset to base unit.
BASE
7.When receiving a call press SPEAKER 
button on base.
8.When placing a call press SPEAKER 
button then dial number from base.
9.After completing a call press the SPEAKER 
button again.
10.Sound will reset to normal level on both handset and base unit after completing calls. Pressing the BOOST button on subsequent calls will return the volume to your set sound level.
13
