Phone Will Not Hold Charge, Move closer to the base | Clarity C4230

TROUBLESHOOTING

Phone Will Not Hold Charge:

•Make sure the charging contacts on the handset and base are free of dust and dirt.While unplugged, clean the contacts with a soft cloth.

•Make sure CHARGE LED on the base is lit when the handset is in the cradle.

•Handset battery may have developed a memory, due to user improperly charging, and may need to be replaced. (Battery must be charged a full 12 hours before the ﬁrst use.)

Difﬁculty in Placing or Receiving Calls:

•Move closer to the base and try again.

•Make sure you have selected the correct dialing mode, tone or pulse.

•Make sure the AC Adapter is not plugged into a wall outlet with other appliances. Disconnect for 5-10 seconds then reconnect. Place the handset back on the base and reinsert the AC Adapter.

•Make sure the handset battery is fully charged.

Your handset screen is showing Out of Range

•Move closer to the base.

•Place the handset into the base until the screen displays: “Handset Registered.” It will take approximately 5-10 seconds for the handset to register to the base.

•Handset may need to be re-registered to the base manually. First, select INITIAL SETUP on the main menu. Second, select REGISTRATION on the sub-menu.The screen will then display “Please hold the page button until beep.” This will register your handset to the base.The screen will then display the handset number.

43

Image 43

Clarity C4230 manual Phone Will Not Hold Charge, Difﬁculty in Placing or Receiving Calls, Move closer to the base

Contents

C4230TM Page Table of Contents Read and understand all instructions Important Safety InstructionsIf liquid has been spilled into the product 6V 800mAh Ni-MH AAA Use caution when installing or modifying telephone linesSafety Instructions for Batteries For Handset Unit Pacemaker Warning Contents & Parts Checklist Quick Reference Guide 16 OGM/REC Volume Control Optional Installing the Backup Batteries Charging your batteryTo install or replace battery backup batteries HOW to Dial or Receive a Call Basic Handset Operations Telephone Operations Boost Override Volume ControlAudio Tone User with Noise Induced Hearing Loss Intercom Pause FeatureFlash Last number dialed Basic Base Operations Press the soft key Hold on the menu to hold the lineDialing screen and to your call Dialing Tone/Pulse Press Redial to dial last number dialed from the base Last number redialedMute Ringer Style Intercom from BaseVisual Ringer Bed Shaker Other Features on HandsetRinger Setup Lamp Flasher Help Button is not pre-programmed for To Place Call Using Help KeyHelp Key / Memory Storage Save AM/PM Date and Time Registration Initial Setup Auto Talk Telephone Answering Machine Answer SetupSee page 33 for setup instructions Dialing Mode Handset Phonebook/Memory Storage Error tones and timeoutsLCD Contrast Language Menu Next, press the Arrow button down to enter phone number ExampleTo enter phone number Options To Edit or Erase Entries Phonebook Search Saving Caller ID information into Phonebook Receiving Call Waiting Caller ID To dial from phonebookCaller ID Operations Incoming Call Block Call Caller ID ReviewNo calls Unknown call Erasing Caller ID Information Basic Base Functions Access Answering Machine Functions from Base OGM Rec Outgoing Message FfwdPlay Delete LED Screen Access Answering Machine functions from HandsetReview Play/Stop Skip Answer On/Off Memo Repeat Menu Erase Slowdown Message Playback Speed Other Handset Options For Answering MachineAnswer On/Off Outgoing Messages Change OGM Play OGMPress the soft key Select to play outgoing message Record OGM Ring Number Erase OGMToll Saver Security ID Bypass the Outgoing Message Access from a Remote LocationAccess Procedure Dial your phone number Select Memo from the Message Menu Memory is fullRecording and playing memos Recording Memos Phone does not ring when you receive a call TroubleshootingUnit will not operate / no dial tone Move closer to the base Phone Will Not Hold ChargeDifﬁculty in Placing or Receiving Calls Your handset screen is showing Out of Range Technical Specifications Part 68 of FCC Rules Information Regulatory Compliance Customer-Owned Coin/Credit Card Phones This telephone equipment is hearing aid compatiblePart 15 of FCC Rules Information Party responsible for regulatory compliance