Troubleshooting Guide
COMPLAINT | CAUSE | REMEDY |
|
|
|
Compressor cycles on | Voltage | Check the voltage. See the limits on the |
overload. |
| preceding page. If voltage is not within these limits, |
|
| call an electrician. |
|
|
|
| Overload | Check overload, if externally mounted. |
|
| Replace if open. (If the compressor temperature |
|
| is high, remove the overload, cool, and retest.) |
|
|
|
Compressor cycles on | Fan motor | If not running, determine the cause. Replace if |
overload. |
| required. |
|
|
|
| Condenser air flow | Remove the cabinet, inspect the interior surface |
| restriction | of the condenser. If restricted, clean carefully |
|
| with a vacuum cleaner (do not damage fins) or |
|
| brush. Clean the interior base before |
|
| |
|
|
|
| Condenser fins | If the condenser fins are closed over a large |
| (damaged) | area on the coil surface, head pressures will |
|
| increase, causing the compressor to cycle. |
|
| Straighten the fins or replace the coil. |
|
|
|
| Capacitor | Test the capacitor. |
|
|
|
| Wiring | Check the terminals. If loose, repair or replace. |
|
|
|
| Refrigeration system | Check the system for a restriction. |
|
|
|
Insufficient cooling | Air filter | If restricted, clean or replace. |
|
|
|
| Unit undersized | Determine if the unit is properly sized for the |
|
| area to be cooled. |
|
|
|
Excessive noise | Blower or fan | Check the set screw, or clamp. If loose or miss- |
|
| ing, correct. If the blower or fan is hitting scroll |
|
| or barrier, rearrange the air handling parts. |
|
|
|
| Copper tubing | Remove the cabinet and carefully rearrange the |
|
| tubing not to contact the cabinet, |
|
| compressor, shroud, and barrier. |
|
|
|
