Heat Controller RAD-81A RemoteControlOperations, Controls, Power, Temperature Setting, Fan Speed

Models: RADS-81B RAD-81A RAD-101A

1 39
Download 39 pages 44.62 Kb
Page 16
Image 16
RemoteControlOperations

Operation

Controls4 5 6 2 1Remote1.PowerControl2.Temperature SettingOperations3.Fan Speed4.On/Off Timer5. Energy Saver6.Cool/Fan/DryHow to Insert Batteries2.Insert two batteries.•Be sure that both batteries are new.3.Re-attach the cover.16Room Air ConditionerManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

CAUTION: The Remote Controller will not function properly if strong light strikes the sensor window of the air conditioner or if there are obstacles between the Remote Controller and the air conditioner.

The controls look like this:

Controls

3

7

Power

1

Temp

2

Fan Speed

3

Timer Mode

4Manual backgroundManual background 6

Energy Auto

Saver Swing

5

4 5 6 2 1

1.Power

To turn the Set ON, push the button. To turn the Set OFF, push the button again.

This button takes priority over any other buttons.

When you first turn it on, the Set is on the High cool mode and the temp. at 72°F

2.Temperature Setting

This button controls the room temperature setting in a range between 60°F and 86°F in 1° incre- ments.

3.Fan Speed

Pressing the Fan Speed button toggles between Low and High speeds.

4.On/Off Timer

-Stopping Operation

Each press of the button cycles through the options in this order:

1 Hour 2 Hours 3 Hours 4 Hours 5 Hours 6 Hours 7 Hours 8 Hours 9 Hours

10 Hours 11 Hours 12 Hours CANCLE. The set temperature will be raised by 2°F after 30 minutes and again after another 30 minutes.

-Starting Operation

Each press of the button cycles through the options in this order:

1 Hour 2 Hours 3 Hours 4 Hours 5 Hours

6 Hours 7 Hours 8 Hours 9 Hours 10 Hours 11 Hours 12 Hours CANCLE.

5. Energy Saver

The fan stops when the compressor stops cooling.

Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.

6.Cool/Fan/Dry

Everytime you push this button, it will toggle between COOL, FAN, and DRY.

How to Insert Batteries

1.Remove the cover from the back of the remote con- troller

2.Insert two batteries.

Be sure of the polarity when installing the batteries.

Be sure that both batteries are new.
3.Re-attach the cover.

Do not use rechargeable batteries. Such batteries

differ from standard dry cells in shape, dimensions, and perfor- mance.

Remove the batteries from the remote controller if the air condi- tioner is not going to be used for an extended length of time.

16Room Air Conditioner

Page 16
Image 16
Heat Controller RAD-81A, RAD-101A RemoteControlOperations, Controls, Power, Temperature Setting, Fan Speed, 4.On/Off Timer