Heat Controller RADS-81B, RAD-101A, RAD-81A Disassembly, Capacitor Model Rotary Switch Type Model

Disassembly

3. CAPACITOR

MODEL : ROTARY SWITCH TYPE MODEL

1.Remove the control box.

2.Remove the knobs and the screw which fasten control panel from control box.

3.Remove the screw which is located in the front.

4.Open the bottom side of control box.

5.Remove the screw and the clamp which fasten the capacitor.

6.	Disconnect all the leads of capacitor terminals.	Figure 26
7.	Re-install the components by referring to the
	removal procedure, above. (See Figure 26)

MODEL : TOUCH & REMOTE CONTROL TYPE MODEL

1.Remove the control box.

2.Remove the screw which fasten control panel from control box.

3.Remove the screw which located in the front.

4.Open the bottom side of control box.

5.Remove the screw and the clamp which fastens the capacitor.

6.Disconnect all the leads of capacitor terminals.

7.Re-install the components by referring to the

removal procedure, above. (See Figure 27) Figure 27

4. THERMOSTAT

MODEL : ROTARY SWITCH TYPE MODEL

1.Remove the control box.

2.Open the control box.

3.Remove the 2 screws which fasten the thermostat.

4.Disconnect 2 leads of thermostat terminals.

5.Remove the thermostat.

6.Re-install the components by refereing to the above

removal procedure. (See Figure 28) Figure 28

20Room Air Conditioner