Canon C3200 manual Error Messages, Self-Diagnostic Display

Troubleshooting

12

Error Messages

This section explains the various messages that appear on the touch panel display, along with possible causes and remedies.

For explanations of messages that are not listed here, see the Reference Guide, Facsimile Guide, and Network Guide.

Self-Diagnostic Display

Perform the necessary procedures according to the displayed self-diagnostic error message.

Self-diagnostic error messages appear on the touch panel display at the following times:

•When scanning or printing cannot be performed because of an operational error

•When you need to make a decision or take some action during scanning or printing

•When you need to make a decision or take some action while browsing the network

The following is a list of self-diagnostic error messages, along with their possible causes and remedies.

Out of resources. Wait for a moment, then perform operation again.

Cause	You cannot browse the network due to a lack of TCP/IP resources. This may be
	because documents have just been continuously sent or are being continuously
	sent through FTP or Windows (SMB).
Remedy	Wait for a while, and try browsing again.
Set the IP Address.
Cause	This machine is not set with an IP address.
Remedy	Specify the IP Address Settings in TCP/IP Settings in Network Settings in
	System Settings (from the Additional Functions screen), then turn the
	machine's main power OFF and back ON again.

12-8Error Messages