10 Press [Sender's Names (TTI)].

11 Select a sender's name press [OK].

5

Sending Documents

The name registered under <00> is selected by default.

If the desired sender's name is not displayed, press [] or [] to scroll to the desired sender's name.

You can also enter the number of the desired sender's name using - (numeric keys).

NOTE

To use this feature, you must store sender names beforehand. (See "Registering Sender Names," on p. 1-16.)

If you set the unit's name in TX Settings (from the Additional Functions screen), the unit's name is automatically registered as <00>. To set the unit's name, press (Additional Functions) [Communications Settings] [TX Settings] under <Common Settings> press [Unit Name]. (See "Registering the Unit's Name," on p. 1-19.)

5-10Sending Methods

Page 199
Image 199
Canon C3200 manual Press Senders Names TTI Select a senders name press OK