Canon C3200 manual 12-15

# 701

Cause	The specified Department ID does not exist, or the password has changed.
Remedy	Enter the correct Department ID or password using	-	(numeric keys) on
	the control panel, and try sending again.
# 702
Cause	The document could not be sent because memory is full.

Remedy 1 Wait for a few moments and try again after other send jobs are complete.

Remedy 2 Do not send the document to too many recipients at the same time. Divide up the recipients and send the document to a smaller number of recipients each time.

# 703

Cause The memory for the image data is full.

Remedy 1 Wait for a few moments and try again after other send jobs are complete.

Remedy 2 Erase documents stored in inboxes. If the machine still does not operate

normally, turn the main power OFF and then back ON again.

# 704

Cause	An error occurred while reading address information from the Address Book.
Remedy	Check the address settings. If the machine still does not operate normally, turn
	the main power OFF and then back ON again.
# 705
Cause	The send operation was interrupted because the size of the image data is larger
	than the Maximum Data Size for Sending set in E-mail/I-Fax Settings in
	Communications Settings in System Settings (from the Additional Functions
	screen).
Remedy	Change the setting for the Maximum Data Size for Sending in E-mail/I-Fax
	Settings in Communications Settings in System Settings (from the Additional
	Functions screen). Select a lower resolution, or if you are using I-fax, decrease
	the number of pages containing images that you are sending each time, so that
	you do not exceed the Maximum Data Size for Sending.

Troubleshooting

12

Error Messages 12-15