2 Neatly place your originals with the side to be scanned face up in the original supply tray.

Place your originals as far into the feeder as they will go, until the Original Set indicator is lit.

Original Set Indicator

IMPORTANT

Do not add or remove originals while they are being scanned.

When scanning is complete, remove the originals from the original output area to avoid paper jams.

Original Output Area

NOTE

When you are enlarging LTR originals to 11" x 17" or LGL paper, place your originals horizontally.

The scanned originals are output to the original output area in the order they are fed into the feeder.

You can place different size originals together in the feeder if you set the Different Size Originals mode. However, the length (vertical direction) of the different paper sizes must be the same. For example, 11" x 17" and LTR paper can be placed together. (See "Different Size Originals," on p. 4-17.)

1

Introduction to Sending Functions

Placing Originals

1-41

Page 58
Image 58
Canon C3200 manual Original Set Indicator