Linear AM3Plus installation instructions System Diagnostics, Indicators

System Diagnostics

Several indicators on the AM3Plus are for monitoring the system during operation. When calling for technical assistance, Linear’s Technical Services Department may ask the installer to use these indicators to diagnose the system.

Indicators

15 LED indicators are on the AM3Plus. Refer to the fi gure for the location of each indicator.

•POWER lights when AC or DC power is present.

•STATUS/PROGRAM DISPLAY shows supervisory and status conditions, also used for some local programming.

•DECODE lights when a credential has been successfully decoded.

•VALIDATE lights when a credential is determined to be valid.

•ACCESS GRANTED lights when a credential is validated and access is granted.

•PBUS blinks when any PBUS device is successively decoded.

•READER “A” fl ashes when Wiegand A device is successively decoded.

•READER “B” fl ashes when Wiegand B device is successively decoded.

•NETWORK fl ashes in response to network traffi c.

•NETWORK HOST ON-LINElights when the Host PC is connected to the Master Node.

•BACKUP BATTERY LOW lights when backup battery measures low.

•RELAY “A” ACTIVE lights when the Channel “A” relay is energized.

•RELAY “B” ACTIVE lights when the Channel “B” relay is energized.

•RELAY “C” ACTIVE lights when the Channel “C” relay is energized.

•RELAY “D” ACTIVE lights when the Channel “D” relay is energized.

		ACCESS
		GRANTED		NETWORK
DECODE				NETWORK
	VALIDATE			HOST
				ON-LINE
STATUS/PROGRAM
		READER "A"
DISPLAY				BACKUP
			READER "B"
		P-BUS		BATTERY
				LOW
POWER
RELAY "A"	RELAY "B"	RELAY "C"	RELAY "D"
ACTIVE	ACTIVE	ACTIVE	ACTIVE

17